Ring oss for rådgiving! Mandag-Fredag 09-16. Telefon: 69 10 91 10

Velkommen til Strømløs.no!

Tårn / mast

10 artikler

  • Primus Windpower 27' Tårnsett for AIR 30 og AIR 40 vindturbiner

    This tower kit is designed specifically for the Primus Wind Power AIR 30 and AIR 40 wind turbines. To our knowledge this is the most economical and user friendly tower kit available for the “AIR” wind turbines. Guy wire supported construction allows the use of lightweight tubing while providing plenty of strength for all but hurricane conditions. Two people can easily erect a tower with this kit in an hour or so. Since the turbine and the tower kit are light in weight, no winches, vehicles or beasts of burden are needed to erect the tower. All that is required is a little bit of “elbow grease”. We recommend that at least two people be present when the tower is raised, although it is conceivable that a single person could actually raise a tower on their own.

    Les mer
    kr 3 890,00

    På lager hos leverandør

  • Primus Windpower 29' EZ Tårnsett

    The EZ Tower™ is designed specifically for Primus Wind Power, Inc. AIR family of small wind turbines. This guy-wire supported tower uses lightweight tubing while providing plenty of strength. Two people can easily erect this tower in about an hour. Because the wind turbine and EZ Tower™ are lightweight, no winches or vehicles are needed to erect the tower. The EZ Tower™ includes a simple yet effective tower base and anchoring system.

    Les mer
    kr 10 990,00

    På lager hos leverandør

  • Primus Windpower 36" Jordanker

    Sett med fire jordanker Les mer
    kr 2 790,00

    På lager hos leverandør

  • Primus Windpower 45" Jordanker

    Sett med fire jordanker Les mer
    kr 3 890,00

    På lager hos leverandør

  • Primus Windpower 45' Tårnsett for AIR 40 og AIR 30 vindturbiner

    This tower kit is designed specifically for the Primus Wind Power AIR 40 and AIR 30 wind turbines. To our knowledge this is the most economical and user-friendly tower kit available for the AIR wind turbines. Two level, guy wire supported construction allows the use of lightweight tubing while providing plenty of strength, even in high wind conditions. Two people can easily erect the kits in a few hours. Since the turbine and the tower kit are light in weight, no winches, vehicles or beasts of burden are needed to erect the tower. All that is required is the necessary tubing, the proper anchors for your soil, and a little bit of “elbow grease”. We recommend that at least two people be present when the tower is raised, although it is conceivable that a single person could actually raise a tower on their own.

    Les mer
    kr 6 190,00

    På lager hos leverandør

  • Primus Windpower 9' AIR Marine Aluminum installasjonsmast med stabiliseringsrør

    AIR Marine Aluminum Pole Set er en løsning for enkel installasjon av Primus Marine vindturbiner. Settet består av stabiliseringsrør og mast av pulverlakkert aluminium. I tillegg må du ha monteringssettet Marine Tower Hardware Kit som selges separat. Les mer
    kr 4 590,00

    På lager hos leverandør

  • Primus Windpower Marine Installasjonstårn

    AIR Marine Tower Hardware Kit er en løsning for enkel installasjon av Primus Marine vindturbiner i båt. Settet består av klemmer, base med vippemulighet og annet nødvendig utstyr i rustfrittstål. Basen gjør at du kan senke masten for enkel installasjon og adkomst ved vedlikehold.

    Marine Pole kit selges separat

    Les mer
    kr 3 490,00

    På lager hos leverandør

  • Primus Windpower Takforseglingssett

    Primus Windpower Roof Seal Kit Les mer
    kr 1 049,00

    På lager hos leverandør

  • Primus Windpower Takmonteringssett

    This wind turbine roof mount kit is designed to be simple to install and to reduce the vibrations that a wind turbine may produce. It is specifically designed for the mounting of the “AIR” series of wind turbine.

    Les mer
    kr 2 290,00

    På lager hos leverandør

  • Primus Windpower Takmonteringssett med tetning

    This wind turbine roof mount kit is designed to be simple to install and to reduce the vibrations that a wind turbine may produce. It is specifically designed for the mounting of the “AIR” series of wind turbine.

    Les mer
    kr 2 790,00

    På lager hos leverandør

10 artikler

 

BESTILL FØR TORSDAG KL 12:00

FÅ VARENE NESTE UKE
 

KUNDESENTER: 69 10 91 10

MANDAG-FREDAG 08:00-16:00
 

SJEKK VÅRE LAVE PRISER!

VI KJØPER RETT FRA PRODUSENT
 

FÅ SPESIALTILBUD

MED DEG PÅ VÅRT NYHETSBREV